EN

User:
Потребител:
  Password:
Парола:
  Registration
Регистрация
  НАЧАЛО

kukerlandia.com :: Преглед на тема - Nemetschek SCIA Engineer 2019 19.1.2030
kukerlandia.com Форуми kukerlandia.com

 
 Въпроси/ОтговориВъпроси/Отговори   ТърсенеТърсене   ПотребителиПотребители   Потребителски групиПотребителски групи 
 Регистрирайте сеРегистрирайте се   ПрофилПрофил   Влезте, за да видите съобщенията сиВлезте, за да видите съобщенията си   ВходВход 

Nemetschek SCIA Engineer 2019 19.1.2030

 
Създайте нова тема   Напишете отговор    kukerlandia.com Форуми -> Форум (БГ)
Предишната тема :: Следващата тема  
Автор Съобщение
apple2000



Регистриран на: 01 Сеп 2019
Мнения: 3326

МнениеПуснато на: Чет Яну 23, 2020 2:53 pm    Заглавие: Nemetschek SCIA Engineer 2019 19.1.2030 Отговорете с цитат

Nemetschek SCIA Engineer 2019 19.1.2030



Nemetschek SCIA Engineer 2019 19.1.2030
x86,x64 | Languages:Multilanguage | File Size: 2.90 GB



SCIA Engineer 19 brings multiple workflow improvements as well as many new functionalities that will help you handle the analysis of multi-storey buildings and other civil engineering structures with minimum effort while simultaneously increasing the overall efficiency of standard day-to-day tasks.


Features:
-Automatic generation of code-based combinations
-Nonlinear combinations directly derived from linear combinations
-New 3D navigation control
-Simplified buckling settings
-Autodesign in composite design
-Steel fibre reinforced concrete design solution
-SIA 263:1993
-Extended capabilities of punching shear design
-New roundtrip link with Tekla Structures
-Extended Revit link

System Requirements:
OS:Windows 2008/2012 server (x64) / Windows 7/8.1/Windows 10 (x86-x64)
CPU:Min:Intel Core-i3 or AMD Ryzen 3 / Intel Core-i7 or AMD Ryzen 7
RAM:2GB or 16 GB, or more
GPU:256 MB, supporting OpenGL
Free Space:5GB
Display:1280 x 800 (4K Not supported)

Support:
SCIA Engineer 19 is compatible with:Revit 2018, Revit 2019
SCIA Engineer 19 is compatible with:Tekla Structures 2017
SCIA Engineer 19 is compatible with:Etabs 9.2
SCIA Engineer 19 is compatible with:IFC version 2x3
SCIA Engineer 19 is compatible with:SDNF version 2.0 / SDNF version 3.0

WHATS NEW:
Release notes SCIA Engineer 19 Patch 1:

-The issue with update of load panels after changing their property is fixed
-Analysis:fixed missing check before the calculation to ensure compatibility of used independent G modulus with other functionality during the FEM analysis.
-Beams in prefab slabs are automatically excluded from selection of supporting beams/edges of load panels
-Calculation:Fixed memory problem for calculation with big number of load cases and non-linear combinations.
-Calculation:Fixed problem with new hinges in the default post-processing environment in nonlinear -calculation.
-Concrete (advanced): fixed impossibility to import concrete member data when member design is executed.
-Concrete (advanced): fixed wrong consideration of strands with debonding in prestressing.
-Concrete EN:Extreme combination for shear design is recognised in the same way, as is presented in the detailed output.
-Concrete:fixed calculation of 2D reinforcement design for SIA code in case of bigger projects to avoid crashes caused by memory issues.
-Concrete:fixed calculation of creep coefficient in the check of deflections to include also the cement effect.
-Concrete:fixed cover calculation in crack width check performed on beams.
-Concrete:fixed drawing of reinforcement in 3D scene.
-Concrete:fixed error in punching design due to presence of openings with irregular geometry.
-Concrete:fixed error value at unity check of interaction diagram calculated for end sections of ring-shaped beams with high radius.
-Concrete:fixed force reduction in capacity check.
-Concrete:fixed incorrect presentation of combinations combikey in detailed output of 2D reinforcement design in case of a result class.
-Concrete:fixed missing secondary reinforcement when statically required reinforcement is necessary for this direction.
-Concrete:fixed obsolete code dependent parameters for shear when using Belgian national annex.
-Concrete:View-flags for both layers are automatically visible in 3D window when one of them is defined.
-Concrete:Type fix in concrete member data 1D
-Data transfer:fixed XML import of cross-sections with general names.
-Data transfer:fixed XML import of used materials.
-Design Forms User:More Steel section libraries with the same section type can be used in one dialogue. Both are independent on each other.
-Export of free line load to solver is fixed
-Fixed issue when 2D results were unreadable due to overlapping. A new option in the drawing setup was -added for 'Smart Description'. It allows for more extreme values to be shown and easily readable.
-Fixed issue when detailed story results were displayed with extremely high values.
-Fixed issue when results were missing from table/preview when selection was set to 'named selection'
German translation fixed
-Load generated from free loads is not exported to new esa.file.
Loads: fixed content of automatic results classes 'All ULS' 'ALL SLS' and 'All ULS and SLS' does not include ULS Set C type of code combinations.
-Loads:fixed crash due to incorrect data saved by load panels.
-Loads:fixed error caused by free surface load with two vertexes very close together.
-Loads:fixed generation of loads for load panels (load was higher than expected).
-Loads:fixed wrong export of the variable free load with curved edge into FEM analysis.
-Message was improved, currently says what the issue is. The issue can be fixed with Check Structure Data function
-Missing "Restore project window" is available again
-Mobile loads: correct handling of trajectory defined on partial length of a 1D member
-Modelling:fixed crash caused by adding line moment on the edge of 2D shell element.
-Modelling:Fix in cross-link behaviour.
-Modelling:Fix of crash for Refresh surface.
-Modelling:fixed direction of LCS of 2D members for option Tilt of vector defined by point.
-Modelling:fixed proper dividing of the line supports when the divide surface tool is used.
-Nonlinear stage analysis: Fixed problem with user sections.
-Output:fixed incorrect display of output when using 4K monitors.
-Report:fixed illegible text caused by editing picture in Engineering report.
-Report:fixed necessity to regenerate the engineering report after opening the project, where the -report does not contain any change.
-Results:fixed display of dx values in table output (both table results and report preview) of -Deformed structure results for mode shapes (stability and modal analysis)
-Results:fixed evaluation of internal forces on ribs when slab is not active in the considered con--struction stage.
-Results:fixed incorrect results in preview of foundation table due to taken wrong load case.
-Results:fixed missing results in 2D data viewer about surface load after running the test input data.
-SFRC:Calculation of bending moment capacity was fixed
-Some cross-sections have assigned wrong material. Now a message saying which member has the wrong material assigned is displayed,
-Steel:A typo in the steel Fire Resistance member data has been fixed.
-Steel:An issue in which the unity check in the output was different than the unity check in the -3Dscene has been solved.
-Student version have now *.esad extension as a default template
-The columns placed in the structural model are newly neglected as the input into the Punching design.
-The issue when a node was re-assigned to a slab opening and thus no load input in the node was not -used in calculation is fixed
-The problem with regeneration of toolbars was solved

SCREENSHOTS





HOMEPAGE
https://www.scia.net/

DOWNLOAD LINKS :

Код:

https://rapidgator.net/file/69a459270500a5595319b35f626031ec/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part1.rar.html
https://rapidgator.net/file/d5336a85eb6b3eb86c31f8a8893c4d42/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part2.rar.html
https://rapidgator.net/file/42f4eb84ecdef7f3eb7e3e428794f281/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part3.rar.html

https://nitroflare.com/view/830026944D5C3AB/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part1.rar
https://nitroflare.com/view/F0CDDA1E0A447C2/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part2.rar
https://nitroflare.com/view/0F7F3C44104FA61/BaDshaH_Nemetschek.SCIA.Engineer.2019.19.1.2030.part3.rar
Върнете се в началото
Вижте профила на потребителя Изпратете лично съобщение
Покажи мнения от преди:   
Създайте нова тема   Напишете отговор    kukerlandia.com Форуми -> Форум (БГ) Часовете са според зоната GMT
Страница 1 от 1

 
Идете на:  
Не Можете да пускате нови теми
Не Можете да отговаряте на темите
Не Можете да променяте съобщенията си
Не Можете да изтривате съобщенията си
Не Можете да гласувате в анкети


Powered by phpBB © 2001, 2005 phpBB Group
Translation by: Boby Dimitrov
 
Copyright 2009 © Кукерландия. All rights reserved.